- Keithley 7001 数据采集仪
- 【简述】：主要特点及优点:
DC、RF 和光信号开关能力
支持宽范围的输入信号
非常方便与数字表和数字源表组合成自动测量系统
可显示全部通道的工作状态
个独立插槽
支持40 多种开关/ 控制卡
7001是一个半机架尺寸的高密度开关控制器，在工业测试测量方面支持最宽范围的 信号接入。
DC开关能力从纳伏到1100 伏，从飞安（10-15A）到5安，再加上RF 和光开关能力，使7001成为应用
广泛的测量工具。可以不接计算机而由7001自己控制测试过程中的每一步动作。简单的程序即可控制
通道间隔、扫描间隔和扫描次数。一个内置的非易失 存储器可以存储100 种开关状态的组合。
7001 的每一个插槽都可达到40 个通道的容量。这意味着 7001需要的开关卡更少， 减少了对开关
硬件的需要。7001的模拟背板连接可将2块卡组成一个1x80的多路复用器 或一个4x20 的矩阵，或一个复
用器/矩阵的组合（矩阵可被扩展）
7001的主机上的真空荧光显示屏，可同时显示每一通道的开关状态。这些显示包括开关组合状态的图
形显示，使得配置测试系统，修改和调试都非常方便。插槽内的两个卡 的状态是一边一个显示在同一个屏
幕上的
触发连接是一种高速触发总线，可以在7001和其他仪器之间提供简捷的触发协调。这种总线可 以在扫
描时消除GPIB 通讯导致的延迟，大大加快 了系统总的工作速度。 - 【系列】：测试附件及配件电源
- 产品描述
- Main features and advantages:
DC, RF and optical signal switching capability
Support for a wide range of input signals
The automatic measuring system is combined with a digital meter and a digital source meter.
Can display the working status of all channels
Independent slot
Supports more than 40 kinds of switch / control card
1.5 is a high density switch controller with 7001 frame sizes, which supports the widest range of signal access in industrial test measurements.
DC switching capacity from NV to 1100 V, security from the hock (10-15A) to 5 ANN, coupled with the RF and optical switch, 7001 become application
A wide range of measurement tools. Can not take the computer and by 7001 to control each step in the test process. Simple procedures can be controlled
Channel spacing, scanning interval, and number of times. A built-in nonvolatile memory can store a combination of 100 switching states.
7001 of each slot can reach the capacity of 40 channels. This means that 7001 of the required switching cards are less and less on the switch
Hardware needs. 7001 analog back board connection can be 2 cards to form a 1x80 multiplexer or a 4x20 matrix, or a complex
The combination of the device / matrix (the matrix can be extended)
7001 of the host on the vacuum fluorescent display, which can display the switch status of each channel at the same time. These displays include a graph of the state of the switch combination.
Form shows that the configuration of the test system, modify and debug are very convenient. Two card slots in the status of the side are displayed on the same screen.
On the screen
Triggered connection is a high speed trigger bus, can provide a simple trigger coordination between 7001 and other instruments. This bus can be in sweep
Eliminating the delay caused by the GPIB communication, which greatly speeds up the total working speed of the system.
下一个：TDS3032B 数字示波器